Bipolar medical devices are used in surgical procedures that require precise energy delivery within a localized area. In these systems, electrical current flows between two oppositely charged electrodes positioned at the device tip, minimizing the need for current to travel through the patient’s body, which is common with monopolar devices.

Because current is concentrated within a small working area, these devices require highly reliable electrical insulation to prevent unintended arcing, thermal damage, electrical leakage, or device failure. Dielectric coatings are commonly used to provide this level of electrical insulation.

The Shortcomings of Traditional Insulation

Traditional insulation materials can perform adequately in monopolar systems, in which current flows from the patient to a grounding pad. However, bipolar devices operate differently, with current traveling between closely spaced electrodes at the device tip.

This localized current flow places greater demands on insulation performance, particularly in high-frequency or high-temperature applications.

In bipolar applications, conventional coatings may fail due to several mechanisms:

  • Micro-cracking. Small defects can form during manufacturing or use, compromising the integrity of the insulation.
  • Wear from Sterilization Cycles. Repeated cleaning and sterilization can degrade coating performance over time.
  • Thermal Degradation. High-frequency energy can generate localized heat that weakens traditional coatings.
  • Chemical Exposure. Interaction with bodily fluids or cleaning agents can accelerate material breakdown.
  • Dielectric Breakdown. If the voltage exceeds the material’s dielectric strength, electricity can penetrate the coating leading to localized arcing.

To address these failure modes, dielectric coatings are used to meet medical device electrical insulation requirements and improve long-term reliability.

What is A Dielectric Coating?

A dielectric coating is a non-conductive material layer applied to a device surface to prevent electrical current from passing through unintended areas. In bipolar medical devices, these coatings help confine electrical energy to the intended working zone, reducing the risk of arcing or stray current.

Depending on the material and application method, dielectric coatings may also provide secondary benefits such as thermal management and surface durability, or enhanced tissue grip.

Impact of Poor Insulation on Patient Safety

In bipolar medical devices, insufficient insulation can lead to several safety risks during surgical procedures.

If insulation performance is compromised, electrical current may extend beyond the intended treatment area, increasing the risk of thermal injury to surrounding tissue. In addition, insulation failure can result in device malfunction or short-circuiting, disrupting surgical procedures and resulting in poor vessel sealing.

In some cases, insulation breakdown can also expose medical personnel to unintended heat or electrical contact, reinforcing the need for reliable dielectric protection.

TST’s Dielectric Coating Capabilities

TST Engineered Coating Solutions, a division of Fisher Barton, develops dielectric coatings for medical device applications requiring controlled electrical insulation. These coatings are engineered based on device geometry, material compatibility, and operating conditions.

TST uses an R&D team to develop custom coating solutions based on each device’s unique electrical requirements.

TST also takes into account various factors to design each coating, such as:

  • Dielectric Strength. Ability to resist electrical breakdown under applied voltage.
  • Adhesion. Bond strength between the coating and substrate material.
  • Hardness. Resistance to mechanical wear and surface damage.
  • Porosity. Control of internal voids that can affect insulation performance.
  • Corrosion Resistance. Material stability in various chemical solutions.
  • Microstructure. Internal structure that influences coating durability and performance.

These coatings are applied using thermal spray processes, which use electrical energy or combustion to melt coating material and deposit it onto a prepared surface. This process allows for controlled coating thickness and consistent coverage across complex geometries.

Fisher Barton Offers Dielectric Coating for Medical Devices

Fisher Barton provides dielectric spacer coatings designed to control critical gap spacing in bipolar medical devices. Maintaining precise spacing between conductive electrodes helps ensure consistent electrical performance and reduces the risk of unintended current flow, and device failure through dielectric breakdown.

These coatings are tailored to each device’s geometry and operating conditions, supporting reliable insulation performance throughout the device lifecycle.

Contact Fisher Barton to discuss your device requirements and determine the appropriate coating materials and application methods for your design.